Trim - B-Pillar - Lower - LH (Model YL) (Remove and Replace)
Correction code
15180100302
FRT
0.18
NOTE: Unless
otherwise explicitly stated in the procedure, the correction code and its
associated FRT reflect all of the work required to perform this procedure,
including the linked procedures. Do not stack correction
codes unless explicitly told to do so.
NOTE: See Flat Rate Times to
learn more about FRTs and how they are created.
NOTE: See Personal Protection to make
sure you are wearing proper PPE when performing the procedure below.
NOTE: See Ergonomic Precautions for safe and healthy
working practices.
Remove
- Remove the LH lower A-pillar trim. See Trim - A-Pillar - Lower - LH (Remove and Replace).
- Move the LH front seat forward.
- Remove the LH lower C-pillar trim. See Trim - C-Pillar - Lower - LH (Model YL) (Remove and Replace).
-
Remove the push clip at the bottom of the LH lower B-pillar trim.
-
Release both top side clips on the LH
lower B-pillar trim. Pry the upper part of the trim inwards, then pull the lower part to
release the remaining clips, and then remove the trim from the vehicle.
Install
-
Align the guide tabs with the slots,
and then install the clips that attach the trim to the vehicle.
-
Install the push clip at the bottom of the LH lower B-pillar trim.
- Install the LH lower C-pillar trim. See Trim - C-Pillar - Lower - LH (Model YL) (Remove and Replace).
- Move the LH front seat to original position.
- Install the LH lower A-pillar trim. See Trim - A-Pillar - Lower - LH (Remove and Replace).