2026-08-09

CloseOut - Center Console (Remove and Replace)

Correction code 1519010032 FRT 0.72 NOTE: Unless otherwise explicitly stated in the procedure, the correction code and its associated FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. NOTE: See Personal Protection to make sure you are wearing proper PPE when performing the procedure below. NOTE: See Ergonomic Precautions for safe and healthy working practices.

Torque Specifications

Table 1. Torque Specifications: CloseOut - Center Console (Remove and Replace)
Description Torque Value Recommended Tools Reuse/Replace Notes
Screw that secures the center console closeout assembly to the center console
1.2 Nm (.9 lbs-ft)
  • Torx T20 bit
 Reuse

Remove

  1. Remove the puddle light. See Puddle Lamp - Center Console (Remove and Replace).
  2. Remove the screw that secures the center console closeout assembly to the center console.
    Tip
    Use of the following tool(s) is recommended:
    • Torx T20 bit
  3. Release the tabs (x4) that attach the closeout to the center console, and then remove the closeout from the vehicle.

Install

  1. Install the tabs (x4) that attach the closeout to the center console.
  2. Install the screw that secures the center console closeout assembly to the center console.
    1.2 Nm (.9 lbs-ft)
    Tip
    Use of the following tool(s) is recommended:
    • Torx T20 bit
  3. Install the puddle light. See Puddle Lamp - Center Console (Remove and Replace).