2026-08-09

Liftgate Seal (Remove and Replace)

Correction code 1170030102 FRT 0.18 NOTE: Unless otherwise explicitly stated in the procedure, the correction code and its associated FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. NOTE: See Personal Protection to make sure you are wearing proper PPE when performing the procedure below. NOTE: See Ergonomic Precautions for safe and healthy working practices.

Remove

  1. Remove the trunk sill trim. See Trunk Sill Lower Trim (Remove and Replace).
  2. Apply tape on the vertical line position of the sealing strip for accurate installation.
  3. Pull the seal outward to remove it from the vehicle.

Install

  1. Align the line on the liftgate seal to the tape.
  2. Install the liftgate seal.
    Note
    Tap the liftgate seal with a rubber hammer to fully install it.
    Note
    Ensure that the seal covers the interior trim panel.
  3. Remove the masking tape.
  4. Install the trunk sill trim. See Trunk Sill Lower Trim (Remove and Replace).