Insulator - Wheelhouse - Front - RH (Model YL) (Remove and Replace)
Correction code
15301000602
FRT
0.66
NOTE: Unless
otherwise explicitly stated in the procedure, the correction code and its
associated FRT reflect all of the work required to perform this procedure,
including the linked procedures. Do not stack correction
codes unless explicitly told to do so.
NOTE: See Flat Rate Times to
learn more about FRTs and how they are created.
NOTE: See Personal Protection to make
sure you are wearing proper PPE when performing the procedure below.
NOTE: See Ergonomic Precautions for safe and healthy
working practices.
Remove
- Remove the RH rear trunk side trim. See Trunk Side Trim - LH (Model Y L) (Remove and Replace).
-
Release the clips (x3) that attach the
RH body harness to the body, and move it aside.
-
Remove the RH front wheelhouse
insulator from the vehicle.
Install
-
Install the RH front wheelhouse
insulator to the vehicle.
-
Install the clips (x3) that attach the
RH body harness to the body.
- Install the RH rear trunk side trim. See Trunk Side Trim - LH (Model Y L) (Remove and Replace).