Carpet - 3rd Row (Remove and Replace)
Correction code
15308102
0.60
NOTE: Unless otherwise explicitly
stated in the procedure, the above correction code and FRT reflect all of the work
required to perform this procedure, including the linked procedures. Do not stack correction codes unless
explicitly told to do so.
NOTE: See Flat Rate
Times to learn more about FRTs and how they are created.
NOTE: See Personal Protection to make sure wearing proper PPE when
performing the below procedure. NOTE: See for safe and healthy working
practices.
Remove
- Remove the LH 2nd row seat assembly. See .
- Remove the RH 2nd row seat assembly. See .
- Remove the 3rd row seat cushion. See .
- Remove the LH and RH seat cushion bolsters. See .
-
Release the clip that attaches the 3rd row carpet to the LH support
bracket.
-
Using a retractable blade, cut a thin straight line in the 3rd row carpet
from the LH seat belt opening to the edge of the carpet.
-
Remove the 3rd row carpet from under the LH trunk side trim.
-
Release the clip that attaches the RH body harness to the body.
-
Using a retractable blade, cut a thin straight line in the 3rd row carpet
from the RH seat belt opening to the edge of the carpet.
-
Remove the 3rd row carpet from under the RH trunk side trim.
-
Remove the 3rd row carpet from the vehicle.
Install
-
Using a retractable blade, cut a thin straight line on the 3rd row carpet
from LH seat belt opening to the edge of the carpet. Repeat this step for
the RH side.
- Install the 3rd row carpet into the vehicle.
-
Install the 3rd row carpet under the RH trunk side trim.
-
Install the clip that attaches the RH body harness to the body.
-
Install the 3rd row carpet under the LH trunk side trim.
-
Install the clip that attaches the 3rd row carpet to the LH support
bracket.
- Install the LH and RH seat cushion bolsters. See .
- Install the 3rd row seat cushion. See .
- Install the RH 2nd row seat assembly. See .
- Install the LH 2nd row seat assembly. See .