Door Outer Panel
Correction code:
10100500302
10100500702
10100502902
10100500802
NOTE:
Unless explicitly stated in the procedure, the above
correction code includes all Collision Repair work required
to perform this procedure, including the linked Collision
Repair procedures. Do not stack Collision Repair
correction codes unless explicitly told to do
so. Add any associated mechanical procedures
needed to perform this procedure.
Repair Information
- Review all collision repair general practices and safety documentation and wear the appropriate PPE (Personal Protective Equipment) before beginning this procedure.
- This procedure can be completed without using a frame bench.
Parts List
Quantity | Description | Image / Notes |
---|---|---|
1 | MY OTR PNL STMPNG,LH,FR DOOR,CIW SVC E-COATED (Front Door Outer Panel) |
![]() |
1 | MY RR DOOR PNL OTR, LH, MODEL Y SVC E-COATED (Rear Door Outer Panel) |
![]() |
When ordering parts, refer to the Parts Catalog and enter the VIN of the vehicle being repaired to find the correct parts (and the part numbers) for the vehicle. Alternatively, use the search function in the Parts Catalog to find a specific part for the vehicle.
Repair Procedure
- Separate the hemmed flange.
- Prepare for installation.
-
Apply anti-flutter foam and
butyl patches as needed to match the original configuration, and use an
approved structural adhesive to secure the hemmed flange.
NoteRefer to "Approved Structural Adhesive and Urethane Sealants" for a list of current approved foam products and structural adhesives.
- Install the new component or components.
- Fold over the hemmed flange.
- Perform any necessary post-repair operations.