Rear Wheelhouse Inner Complete Assembly
Correction code:
10101907802
10101907702
NOTE:
Unless explicitly stated in the procedure, the above
correction code includes all Collision Repair work required
to perform this procedure, including the linked Collision
Repair procedures. Do not stack Collision Repair
correction codes unless explicitly told to do
so. Add any associated mechanical procedures
needed to perform this procedure.
Repair Information
- Review all collision repair general practices and safety documentation and wear the appropriate PPE (Personal Protective Equipment) before beginning this procedure.
- Properly mount the vehicle on a frame bench when performing this procedure.
Parts List
| Quantity | Description | Image / Notes |
|---|---|---|
| 1 | ASY, W/H INNER COMPLETE (Rear Wheelhouse Inner Assembly) | |
| 20 | Structural Bulb Rivet, 6.5 mm | |
| 3 | Bolt | Tesla part number 1063260-00-C. |
When ordering parts, refer to the Parts Catalog and enter the VIN of the vehicle being repaired to find the correct parts (and the part numbers) for the vehicle. Alternatively, use the search function in the Parts Catalog to find a specific part for the vehicle.
Repair Procedure
- Remove the Trim - Package Tray (Premium) (Remove and Replace).
- Remove the Front Carpet - Rear Trunk (Remove and Replace).
- Remove the Tub Carpet - Rear Trunk (Remove and Replace).
- Remove the Busbar - Charge Port to HV Battery (China) (Remove and Replace).
- Remove the ECU - Charge Port (Gen4) (Remove and Replace).
- Remove the Retractor - Seatbelt - 2nd Row - Outboard (Single Side) (Remove and Replace).
- Remove the Damper - Rear - LH (Remove and Replace).
- Remove the Link - Aft - Lower - Rear - LH (Remove and Replace).
- Remove the Link - Aft - Upper - Rear - LH (Remove and Replace).
- Remove the Link - Fore - Lower - Rear - LH (Remove and Replace).
- Remove the Link - Fore - Upper - Rear - LH (Remove and Replace).
- Remove the Link - Fore - Upper - Rear - RH (Remove and Replace).
-
Remove the Parcel Shelf Extension (Front).
-
Remove the original component.
-
Prepare for installation.
- Apply structural adhesive to the mating surfaces on the vehicle and the new component or components.
-
Install the new component or components.
Torque the bolts to 24 Nm.
-
Install the new Parcel Shelf Extension (Front).
- Perform any necessary post-repair operations.
- Install the Link - Fore - Upper - Rear - RH (Remove and Replace).
- Install the Link - Fore - Upper - Rear - LH (Remove and Replace).
- Install the Link - Fore - Lower - Rear - LH (Remove and Replace).
- Install the Link - Aft - Upper - Rear - LH (Remove and Replace).
- Install the Link - Aft - Lower - Rear - LH (Remove and Replace).
- Install the Damper - Rear - LH (Remove and Replace).
- Install the Retractor - Seatbelt - 2nd Row - Outboard (Single Side) (Remove and Replace).
- Install the ECU - Charge Port (Gen4) (Remove and Replace).
- Install the Busbar - Charge Port to HV Battery (China) (Remove and Replace).
- Install the Tub Carpet - Rear Trunk (Remove and Replace).
- Install the Front Carpet - Rear Trunk (Remove and Replace).
- Install the Trim - Package Tray (Premium) (Remove and Replace).