Rear Subframe Crossmember (Upper)

Repair Information

Review all collision repair general practices and safety documentation and wear the appropriate PPE (Personal Protective Equipment) before beginning this procedure.
This procedure can be completed without using a frame bench.

Parts List


Quantity	Description	Image / Notes
1	ASY, CROSSMEMBER, RR SUBFRAME UPR (Rear Subframe Crossmember – Upper )
11	High Strength Structural Rivet, 6.5 mm
4	Bolt , SEMS,[FL],HX,M8X23.5,[109],G1009,PTC.	Tesla part number 1063260-00-C.

When ordering parts, refer to the Parts Catalog and enter the VIN of the vehicle being repaired to find the correct parts (and the part numbers) for the vehicle. Alternatively, use the search function in the Parts Catalog to find a specific part for the vehicle.

Repair Procedure

Remove the Trunk Floor Assembly (Complete).
Remove the original component.
Factory Spot Weld

Factory SPR
or Drill through factory spot welds
Note
When drilling out spot welds, use a drill bit that creates a hole correctly sized for the fastener that will replace the spot weld.

Bolt
Prepare for installation.

High Strength Structural Rivet, 6.5 mm

Bolt
Apply structural adhesive to the mating surfaces on the vehicle and the new component or components.
Install the new component or components.
Torque the bolts to 24 Nm.
Install the Trunk Floor Assembly (Complete).
Perform any necessary post-repair operations.