Charge Port Controller Bracket
Correction code:
10101907402
NOTE:
Unless explicitly stated in the procedure, the above
correction code includes all Collision Repair and Service
repair work required to perform this procedure, including
the linked Collision Repair procedures and linked Service
procedures. Do not stack Collision Repair correction
codes unless explicitly told to do so. Depending
on the damage to the vehicle, additional repairs may be
required.
Repair Information
- Review all collision repair general practices and safety documentation and wear the appropriate PPE (Personal Protective Equipment) before beginning this procedure.
- This procedure can be completed without using a frame bench.
Parts List
| Quantity | Description | Image / Notes |
|---|---|---|
| 1 | ASSEMBLY - UNIVERSAL CHARGEPORT CONTROLLER BRACKET (Charge Port Controller Bracket) | |
| 4 |
When ordering parts, refer to the Parts Catalog and enter the VIN of the vehicle being repaired to find the correct parts (and the part numbers) for the vehicle. Alternatively, use the search function in the Parts Catalog to find a specific part for the vehicle.
Repair Procedure
- Remove the Wheel Arch Liner - Rear - LH (Remove and Replace).
- Remove the Front Carpet - Rear Trunk (Remove and Replace).
- Remove the Tub Carpet - Rear Trunk (Remove and Replace).
- Remove the ECU - Charge Port (Gen4) (Remove and Replace).
- Remove the Busbar - Charge Port to HV Battery (China) (Remove and Replace).
-
Remove the original component.
or Factory Spot Welds
-
Prepare for installation.
- Apply structural adhesive to the mating surfaces on the vehicle and the new component or components.
- Install the new component or components.
- Perform any necessary post-repair operations.
- Install the Busbar - Charge Port to HV Battery (China) (Remove and Replace).
- Install the ECU - Charge Port (Gen4) (Remove and Replace).
- Install the Tub Carpet - Rear Trunk (Remove and Replace).
- Install the Front Carpet - Rear Trunk (Remove and Replace).
- Install the Wheel Arch Liner - Rear - LH (Remove and Replace).