Roof Rack Brackets
Repair Information
- Review all collision repair general practices and safety documentation and wear the appropriate PPE (Personal Protective Equipment) before beginning this procedure.
- This procedure can be completed without using a frame bench.
Parts List
Quantity | Description | Image / Notes |
---|---|---|
1 each, as needed | M3, ROOF RACK, FR, LH (Roof Rack Bracket – LH
Front) M3, ROOF RACK, RR, LH (Roof Rack Bracket – LH Rear) M3, ROOF RACK, FR, RH (Roof Rack Bracket – RH Front) M3, ROOF RACK, RR, RH (Roof Rack Bracket – RH Rear) |
Note Each
roof rack bracket (front LH, front RH, rear LH, and rear
RH) has a different part number. Order the correct
replacement bracket for each bracket being
replaced. |
2 rivets per bracket | Structural Countersunk Rivet, 6.5 mm |
When ordering parts, refer to the Parts Catalog and enter the VIN of the vehicle being repaired to find the correct parts (and the part numbers) for the vehicle. Alternatively, use the search function in the Parts Catalog to find a specific part for the vehicle.
Repair Procedure
- Remove the original component.
-
Prepare for installation.
NoteA red X indicates a location where a factory-installed fastener is not being replaced.
- Apply structural adhesive to the mating surfaces on the vehicle and the new component or components.
-
Install the new component or components.
NoteRemove a small area of the NVH foam under the new component to allow clearance for the rivets.
- Perform any necessary post-repair operations.