2023-10-17

Front Carpet - Rear Trunk (Remove and Replace)

Correction code 1530030012 FRT 0.42 NOTE: Unless otherwise explicitly stated in the procedure, the correction code and FRT listed above reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See to learn more about FRTs and how they are created. NOTE: See Personal Protection to make sure you are wearing proper PPE when performing the procedure below. NOTE: See for safe and healthy working practices.

Remove

  1. Remove the LH and RH 2nd row seat side bolsters. See Bolster - Side - Seat - 2nd Row - LH (Remove and Replace).
  2. Remove the 2nd row lower seat cushion. See .
  3. Remove the LH 2nd row seat back. See Seatback - 2nd Row - LH (Remove and Replace).
  4. Remove the RH 2nd row seat back. See .
  5. Remove the trunk load floor. See .
  6. Remove the trunk sill trim. See Trim - Trunk Sill (Remove and Replace).
  7. Remove the LH and RH load floor brackets. See Bracket - Trunk Load Floor - LH (Remove and Replace).
  8. Remove the rear trunk tub. See Tub Carpet - Rear Trunk (Remove and Replace).
  9. Remove the rear carpet.

Install

  1. Install the rear carpet.
  2. Install the rear trunk tub. See Tub Carpet - Rear Trunk (Remove and Replace).
  3. Install the LH and RH load floor brackets. See Bracket - Trunk Load Floor - LH (Remove and Replace).
  4. Install the trunk sill trim. See Trim - Trunk Sill (Remove and Replace).
  5. Install the trunk load floor. See .
  6. Install the RH 2nd row seat back. See .
  7. Install the LH 2nd row seat back. See Seatback - 2nd Row - LH (Remove and Replace).
  8. Install the 2nd row lower seat cushion. See .
  9. Install the LH and RH 2nd row seat side bolsters. See Bolster - Side - Seat - 2nd Row - LH (Remove and Replace).