2026-08-09

Carrier Bracket - Cowl Screen - LH (Remove and Replace)

Correction code 1225010042 FRT 0.06 NOTE: Unless otherwise explicitly stated in the procedure, the correction code and its associated FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See to learn more about FRTs and how they are created. NOTE: See Personal Protection to make sure you are wearing proper PPE when performing the procedure below. NOTE: See for safe and healthy working practices.

Remove

  1. Remove the LH hood hinge cover. See .
  2. Place a towel on the latch and close the hood partially.
  3. Release the clips (x2) of the LH cowl screen that attach the cowl screen to the bracket.
  4. Release the clip that attaches the bracket to the vehicle, and then remove the cover from the vehicle.

Install

  1. Install the clip that attaches the bracket to the vehicle.
  2. Install the LH clips (x2) of the cowl screen that attach the cowl screen to the bracket.
  3. Open the hood and remove the towel.
  4. Install the LH hood hinge cover. See .