2024-07-17

后顶上部

Repair Procedure

  1. 拆下后顶总成上方的组件。

    根据车辆生产日期,后顶总成上方的组件可能是以下之一:

  2. Remove the original component.
    or Factory Spot Welds
  3. Prepare for installation.

    or Countersunk Rivets, 4.8 mm Long

    or Rivets, 4.8 mm

    or SPRs, 5x4.5
    Informational PurposesAn informational icon, calling your attention
    以下 Tesla SPR 模具用于安装此 SPR:KA 075 2113。
    or SPRs, 5x5
    Informational PurposesAn informational icon, calling your attention
    以下 Tesla SPR 模具用于安装此 SPR:KA 075 2113。
    or SPRs, 5x6 H4
    Informational PurposesAn informational icon, calling your attention
    以下 Tesla SPR 模具用于安装此 SPR:SM 085 0125。
    or SPRs, 5x6 H2
    Informational PurposesAn informational icon, calling your attention
    以下 Tesla SPR 模具用于安装此 SPR:SM 085 0125。
  4. Apply structural adhesive to the mating surfaces on the vehicle and the new component or components.
  5. Install the new component or components.
  6. 安装之前为处理后顶总成而拆下的组件:
  7. Perform any necessary post-repair operations.