2024-07-17
后车架纵梁总成（2014 年 11 月 5 日后制造的车辆）
Repair Information
- Review all collision repair general practices and safety documentation and wear the appropriate PPE (Personal Protective Equipment) before beginning this procedure.
- Properly mount the vehicle on a frame bench when performing this procedure.
Parts List
| Quantity | Description | Image / Notes |
|---|---|---|
| 1 | REAR MEMBER RAIL ASSEMBLY（后车架纵梁总成） |
|
| 5 |
Structural Rivet, 6.5 mm Medium
|
When ordering parts, refer to the Parts Catalog and enter the VIN of the vehicle being repaired to find the correct parts (and the part numbers) for the vehicle. Alternatively, use the search function in the Parts Catalog to find a specific part for the vehicle.
Repair Procedure
-
拆卸后面板总成。
-
拆卸后备箱底板加长件（2014 年 11 月 5 日后制造的车辆）。
-
Remove the original component.
or 
Factory Structural Rivets
-
Prepare for installation.
- Apply structural adhesive to the mating surfaces on the vehicle and the new component or components.
- Install the new component or components.
-
安装后备箱底板加长件（2014 年 11 月 5 日后制造的车辆）。
-
安装后面板总成。
- Perform any necessary post-repair operations.
