后备箱底板加长件(2014 年 11 月 5 日后制造的车辆)
Repair Information
- 此维修程序适用于约在 2014 年 11 月 5 日后制造的车辆(配有第二代后节点)。
- 对于大约截至 2014 年 11 月 5 日制造的车辆(配有第一代后节点),请参阅 后备箱底板加长件(截至 2014 年 11 月 5 日制造的车辆)。
- Review all collision repair general practices and safety documentation and wear the appropriate PPE (Personal Protective Equipment) before beginning this procedure.
- This procedure can be completed without using a frame bench.
Parts List
Quantity | Description | Image / Notes |
---|---|---|
1 | TRUNK FLOOR PANEL EXTENSION REAR(后备箱底板加长件) |
![]() |
4 |
![]() |
|
8 |
![]() |
|
9 |
![]() |
|
1 |
![]() |
|
3 |
![]() |
Tesla 零件号 1007580-00-A。 |
When ordering parts, refer to the Parts Catalog and enter the VIN of the vehicle being repaired to find the correct parts (and the part numbers) for the vehicle. Alternatively, use the search function in the Parts Catalog to find a specific part for the vehicle.
Repair Procedure
- Remove the original component.
-
Prepare for installation.
注A red X indicates a location where a factory-installed fastener is not being replaced.
or
Structural Bulb Rivets, 6.5 mm
or
SPRs, 5x4
注以下 Tesla SPR 模具用于安装此 SPR:SM 070 0056。or
SPRs, 5x4.5
注以下 Tesla SPR 模具用于安装此 SPR:KA 075 2113。or
SPRs, 5x6 H2
注以下 Tesla SPR 模具用于安装此 SPR:SM 085 0125。 - Apply structural adhesive to the mating surfaces on the vehicle and the new component or components.
-
Install the new component or components.
将螺栓拧紧至 30 Nm。
- Perform any necessary post-repair operations.