2024-07-10
车灯外壳加强件
Repair Information
- Review all collision repair general practices and safety documentation and wear the appropriate PPE (Personal Protective Equipment) before beginning this procedure.
- This procedure can be completed without using a frame bench.
Parts List
| Quantity | Description | Image / Notes |
|---|---|---|
| 1 | REINF - RR LAMP HOUSING（车灯外壳加强件） |
|
| 8 |
Rivet, 4.8 mm
|
When ordering parts, refer to the Parts Catalog and enter the VIN of the vehicle being repaired to find the correct parts (and the part numbers) for the vehicle. Alternatively, use the search function in the Parts Catalog to find a specific part for the vehicle.
Repair Procedure
-
拆下 围板外壳 – 非中国充电端口车辆 的必要部分，露出要更换的底层组件。
-
Remove the original component.
or 
Factory Spot Welds
-
Prepare for installation.
or Rivets, 4.8 mm
- A = 11 毫米。
- B = 7 毫米。
- Apply structural adhesive to the mating surfaces on the vehicle and the new component or components.
- Install the new component or components.
-
安装先前为更换组件而从 围板外壳 – 非中国充电端口车辆 拆下的必要部分。
- Perform any necessary post-repair operations.