2026-11-06

Carpet - Interior Complete (Remove and Replace)

Correction Code 15302102

  • 2026-11-06: Updated references.

Removal

  1. Remove both front seats. See Seat Assembly - 1st Row - LH (Remove and Install).
  2. Remove the driver footrest. See .
  3. Remove the LH and RH sill panel trim. See Trim - Sill Panel - LH (Remove and Replace).
  4. Remove rear seat cushion (refer to procedure)
  5. Loosen bolts (x2) securing front edge of rear cushion seat base frame and slide carpet out from under it (torque 26 Nm).
  6. Remove the LH and RH rear sill panel trim. See Trim - Sill Panel - LH - Rear (Remove and Replace).
  7. Remove LH and RH lower 'B' post trim. See Trim - B-Pillar - Lower - LH (Remove and Install).
  8. Remove the center console assembly. See Center Console Assembly (Remove and Replace).
  9. Remove the LH footwell cover. See .
  10. Remove the RH footwell cover. See Assembly - Cover - Footwell - Passenger's (Remove and Replace).
  11. Release and reposition the center console assembly harness.
  12. Release the carpet from around both front footwell areas.
  13. Release the carpet from along LH and RH rocker areas.
  14. Release the carpet from around both rear footwell areas.
  15. With assistance, remove the carpet from the vehicle.
    CAUTION
    Take care not to damage component(s).

Installation

  1. Installation procedure is the reverse of removal.