03/07/2024 16:03:30
Rear Frame Rail Assembly (Vehicles Built Through November 5, 2014)
Repair Information
- Review all collision repair general practices and safety documentation and wear the appropriate PPE (Personal Protective Equipment) before beginning this procedure.
- Properly mount the vehicle on a frame bench when performing this procedure.
Parts List
| Quantity | Description | Image / Notes |
|---|---|---|
| 1 | ASY - MEMBER RAIL (Rear Frame Rail Assembly) |
|
| 6 |
Structural Rivet, 6.5 mm Medium
|
When ordering parts, refer to the Parts Catalog and enter the VIN of the vehicle being repaired to find the correct parts (and the part numbers) for the vehicle. Alternatively, use the search function in the Parts Catalog to find a specific part for the vehicle.
Repair Procedure
-
Remove the Rear Panel Assembly.
-
Remove the Rear Trunk Floor Assembly.
-
Remove the Rear Trunk Floor Extension (Vehicles Built Through November 5, 2014).
-
Remove the original component.
or 
Factory Structural Rivets
-
Prepare for installation.
- Apply structural adhesive to the mating surfaces on the vehicle and the new component or components.
- Install the new component or components.
-
Install the Rear Trunk Floor Extension (Vehicles Built Through November 5, 2014).
-
Install the Rear Trunk Floor Assembly.
-
Install the Rear Panel Assembly.
- Perform any necessary post-repair operations.
