Third Row Seat Floor (Built Through November 5, 2014)
Repair Information
- Review all collision repair general practices and safety documentation and wear the appropriate PPE (Personal Protective Equipment) before beginning this procedure.
- This procedure can be completed without using a frame bench.
Parts List
| Quantity | Description | Image / Notes |
|---|---|---|
| 1 | 3RD ROW SEAT FLOOR ASSEMBLY |
|
| 2 |
High Strength Structural Rivet, 6.5 mm
|
|
| 10 |
Structural Bulb Rivet, 6.5 mm
|
When ordering parts, refer to the Parts Catalog and enter the VIN of the vehicle being repaired to find the correct parts (and the part numbers) for the vehicle. Alternatively, use the search function in the Parts Catalog to find a specific part for the vehicle.
Repair Procedure
-
Remove the original component.
or 
Factory SPRs
-
Prepare for installation.
Trim the service part as shown in the following image (remove the areas shaded in red). Blueprint fasteners circled before trimming part.
or High Strength Structural Rivets, 6.5 mm
- A = 73 mm
- B = 10 mm
- Apply structural adhesive to the mating surfaces on the vehicle and the new component or components.
- Install the new component or components.
- Perform any necessary post-repair operations.
