2026-08-09

Schallabsorber – Motorraum – Hinten (Ausbauen und Ersetzen)

Korrekturcode 120102022.10 NOTE: Unless otherwise explicitly stated in the procedure, the correction code and its associated FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. NOTE: See Persönlicher Schutz to make sure wearing proper PPE when performing the below procedure. NOTE: See for safe and healthy working practices.

Ausbauen

  1. Entfernen Sie den hinteren Hilfsrahmen. Siehe Hilfsrahmen-Baugruppe - Hinten (Aus- und Einbau).
  2. Entfernen Sie die 6 Clips, mit denen der Schallabsorber im hinteren Motorraum an der Karosserie befestigt ist, und entfernen Sie den Schallabsorber aus dem Fahrzeug.

Montieren

Beim Einbauverfahren werden die Schritte des Ausbauverfahrens in umgekehrter Reihenfolge ausgeführt.