2024-07-17

门槛(整体)

Parts List

Quantity Description Image / Notes
1 Asy, Side Sill COMP(门槛整体)
5 Structural Bulb Rivet, 6.5 mm
38 Structural Rivet, 6.5 mm Medium
8 Bolt, hex-head ,M8-1.25x20 Tesla 零件号 1007580-00-A。
1 Bolt, hex-head , M8x50 Tesla 零件号 1046838-00-A。
4 Bolt, Torx-head , M8x20 Tesla 零件号 1014747-00-B。
Informational PurposesAn informational icon, calling your attention
如果车辆在指示的前扭矩盒内部 Torx 头螺栓位置配有六角头螺栓,则订购额外的 M8-1.25x20 六角头螺钉(Tesla 零件号 1007580-00-A)。

When ordering parts, refer to the Parts Catalog and enter the VIN of the vehicle being repaired to find the correct parts (and the part numbers) for the vehicle. Alternatively, use the search function in the Parts Catalog to find a specific part for the vehicle.

Repair Procedure

  1. 拆下车身侧外件的必要部分,露出要更换的底层组件。
  2. 拆卸C 柱下部加长件
  3. 拆卸轮罩加长件
  4. 拆卸鹰翼门撞销支架
  5. 拆卸B 柱加固件
  6. 拆卸踵板横梁手套箱
  7. 拆卸A 柱加固件总成
  8. 拆卸铰链柱加固件
  9. 铰链柱内件
  10. Remove the original component.
    or Factory SPRs

    or RIVTAC

    or Bolts, hex-head
    Informational PurposesAn informational icon, calling your attention
    此时拆下但不要弃用螺栓。
    or Bolt, Torx-head
    Informational PurposesAn informational icon, calling your attention
    有些车辆采用六角头螺栓,而不是 Torx 头螺栓。如果车辆在指示的 Torx 头螺栓位置配有六角头螺栓,则安装 M8-1.25x20 六角头螺钉。
    Informational PurposesAn informational icon, calling your attention
    此时拆下但不要弃用螺栓。
  11. Prepare for installation.

    or Structural Bulb Rivets, 6.5 mm

    or Structural Rivets, 6.5 mm Medium

    or Bolts, hex-head
    Informational PurposesAn informational icon, calling your attention
    临时安装组件拆卸过程中拆下的螺栓。在结构型粘合剂固化后,更换这些螺栓。
    or Bolt, Torx-head
    Informational PurposesAn informational icon, calling your attention
    临时安装组件拆卸过程中拆下的螺栓。在结构型粘合剂固化后,更换这些螺栓。
  12. Apply structural adhesive to the mating surfaces on the vehicle and the new component or components.
  13. Install the new component or components.
    将所有螺栓拧紧至 25 Nm。
  14. 安装铰链柱内件
  15. 安装铰链柱加固件
  16. 安装A 柱加固件总成
  17. Install the fastener as indicated.

    or Bolts, hex-head

    Informational PurposesAn informational icon, calling your attention
    临时安装组件拆卸过程中拆下的螺栓。在结构型粘合剂固化后,更换这些螺栓。

    将所有螺栓拧紧至 25 Nm。

  18. 安装踵板横梁手套箱
  19. 安装B 柱加固件
  20. 安装轮罩加长件
  21. 安装鹰翼门撞销支架
  22. 安装C 柱下部加长件
  23. 安装C 柱加固件
  24. 安装先前为更换组件而从 车身侧外件 拆下的部分。
  25. Perform any necessary post-repair operations.