后节点外加固件

Repair Information

Review all collision repair general practices and safety documentation and wear the appropriate PPE (Personal Protective Equipment) before beginning this procedure.
This procedure can be completed without using a frame bench.

Parts List


Quantity	Description	Image / Notes
1	REINF- REAR NODE OUTER（后节点外加固件）
7	Bolt, hex-head ，M8-1.25x20	Tesla 零件号 1007580-00-A。
1	Bolt, Torx-head ，M8-1.25x20	Tesla 零件号 1014747-00-B。
4	Bolt, Torx-head M8 x 1.25 x 16 PAN FLANGE HEAD 6-LOBE DRIVE	Tesla 零件号 1008833-01-A。
4	Nut	Tesla 零件号 2007088。

When ordering parts, refer to the Parts Catalog and enter the VIN of the vehicle being repaired to find the correct parts (and the part numbers) for the vehicle. Alternatively, use the search function in the Parts Catalog to find a specific part for the vehicle.

Repair Procedure

Remove the original component.
or Factory Spot Welds
or Bolts, hex-head

Bolt, Torx-head
Prepare for installation.

注
A red X indicates a location where a factory-installed fastener is not being replaced.

or Bolts, hex-head

or Bolt, Torx-head

Nut
Apply structural adhesive to the mating surfaces on the vehicle and the new component or components.
Install the new component or components.
将螺栓和螺母拧紧至 25 Nm。

注
在新 M8-1.25x16 螺栓的螺纹上涂上高强度螺纹胶。
Perform any necessary post-repair operations.