2026-06-26
Sill Retainer Strip
校正代码:
Pending
注意: 除非本程序中有明确规定,否则上述校正代码涵盖执行本程序(包括关联碰撞维修程序以及服务程序)所需的所有碰撞维修和服务维修工作。除非明确要求,否则请勿堆叠碰撞维修校正代码。可能需要进行额外维修,具体视车辆损坏情况确定。
维修信息
- 在开始本程序之前,请查看所有碰撞维修一般实践和安全文档并佩戴适当的 PPE(个人防护装备)。
- 不使用车架工作台也可完成此程序。
- Damaged Battery Flow Nuts (Square Nuts) may be replaced on either Retainer Rail, which may be reused if undamaged. If any Battery Flow Nut on a Retainer Rail is damaged, replace all nuts on that rail. It is not necessary to replace the Battery Flow Nuts on both Retainer Rails if all Battery Flow Nuts on one Retainer Rail are undamaged.
零件清单
| 数量 | 描述 | 图片/备注 |
|---|---|---|
| 1 | ASY, SIDE SILL COMP (Sill - Complete) |
Note If the sill retainer strip
requires replacement, order the sill (complete). |
| As needed | NUT,REC,M10-24X32,[10],G0110,TEFLON |
Tesla part number 1109021-00-B. Note Only if a battery flow nut is
damaged, order the replacement. |
| 3 | 拉钉 , POP RIVET, D4 DOMED HEAD4.8 GRIP AL |
如需订购零件,请参阅零件目录,输入需维修车辆 VIN,查找车辆正确零件(以及零件号)。或者,也可以在零件目录中搜索,查找车辆专用零件。
维修程序
-
Remove the Sill Retainer Strip
corresponding to the damaged location from the Sill (Complete).
-
拆卸原装部件。
或 原厂结构型铆钉
-
准备安装。
或 抽芯铆钉
- 安装新部件。
- 执行任何必要的维修后操作。