2024-07-17

后排座椅底板区块

Repair Procedure

  1. 切割新的后排座椅底板,以制作新组件。

    Cut Line

    Reference Line/Point

    • A = 297 毫米
    • B = 209 毫米
  2. 拆卸原装组件区块。
    or Factory SPRs

    Cut Line

    Reference Line/Point

    • A = 268 毫米
    • B = 180 毫米
  3. Prepare for installation.
    Informational PurposesAn informational icon, calling your attention
    A red X indicates a location where a factory-installed fastener is not being replaced.
    or Countersunk Rivets, 4.8 mm Short

    or Countersunk Rivets, 4.8 mm Long

    or Rivets, 4.8 mm

    • C = 11 毫米
    • D = 22 毫米
    • E = 111 毫米
    • F = 19 毫米
    • G = 140 毫米
    • H = 12 毫米
  4. Apply structural adhesive to the mating surfaces on the vehicle and the new component or components.
  5. Install the new component or components.
  6. Perform any necessary post-repair operations.