脊柱总成
Repair Information
- Review all collision repair general practices and safety documentation and wear the appropriate PPE (Personal Protective Equipment) before beginning this procedure.
- Properly mount the vehicle on a frame bench when performing this procedure.
Parts List
| Quantity | Description | Image / Notes |
|---|---|---|
| 1 | CENTER SPINE ASSY（适用于 2017 年 11 月 29 日后制造的车辆） CENTER SPINE ASSY（适用于 2017 年 11 月 30 日或之后制造的车辆） |
|
| 4 |
Flow Form Rivet S18
|
Tesla 零件号 1069329-00-A。 |
| 6 |
Flow Form Rivet S48
|
Tesla 零件号 1069332-00-A。 |
| 2 | 丁基补缀 | Tesla 零件号 1045194-00-A。 |
When ordering parts, refer to the Parts Catalog and enter the VIN of the vehicle being repaired to find the correct parts (and the part numbers) for the vehicle. Alternatively, use the search function in the Parts Catalog to find a specific part for the vehicle.
Repair Procedure
- 拆卸B 柱顶端上部。
- 拆卸后顶上部。
-
Remove the original component.
or 
Factory Spot Welds
or 
Factory SPRs
-
Prepare for installation.
- Apply structural adhesive to the mating surfaces on the vehicle and the new component or components.
-
Install the new component or components.
注如果车辆有额外用于更新版车顶饰板的孔：在新脊柱的固定夹孔上安装丁基补片，以防进水。
- 安装B 柱顶端上部。
- 安装后顶上部。
- Perform any necessary post-repair operations.
