2024-07-17
轮罩加长件
Repair Information
- Review all collision repair general practices and safety documentation and wear the appropriate PPE (Personal Protective Equipment) before beginning this procedure.
- This procedure can be completed without using a frame bench.
Parts List
| Quantity | Description | Image / Notes |
|---|---|---|
| 1 | ASY, RR WHEELHOUSE EXTN, FR（轮罩加长件 - 前部） |
|
| 11 |
Structural Bulb Rivet, 6.5 mm
|
|
| 2 |
When ordering parts, refer to the Parts Catalog and enter the VIN of the vehicle being repaired to find the correct parts (and the part numbers) for the vehicle. Alternatively, use the search function in the Parts Catalog to find a specific part for the vehicle.
Repair Procedure
-
拆卸C 柱下部加长件。
-
Remove the original component.
or 
Factory Spot Welds
-
Prepare for installation.
注A red X indicates a location where a factory-installed fastener is not being replaced.
or Structural Bulb Rivets, 6.5 mm
or 
SPRs, 5x4.5
注安装此 SPR 需要使用以下 Tesla SPR 模具：KA 075 2113。
- Apply structural adhesive to the mating surfaces on the vehicle and the new component or components.
- Install the new component or components.
-
安装C 柱下部加长件。
-
安装C 柱加固件。
- Perform any necessary post-repair operations.