后节点内部加固件（后）

Repair Information

Review all collision repair general practices and safety documentation and wear the appropriate PPE (Personal Protective Equipment) before beginning this procedure.
This procedure can be completed without using a frame bench.

Parts List


Quantity	Description	Image / Notes
1	REINF- RR NODE INNER RR（后节点内部加固件（后））
6	High Strength Structural Rivet, 6.5 mm
3	Bolt, Panhead Flange , M8x16 - 钢 [98] 锌镍黑色	Tesla 零件号 1008833-01-A。
3	Nut	Tesla 零件号 2007088。

When ordering parts, refer to the Parts Catalog and enter the VIN of the vehicle being repaired to find the correct parts (and the part numbers) for the vehicle. Alternatively, use the search function in the Parts Catalog to find a specific part for the vehicle.

Repair Procedure

Remove the original component.
or Factory Spot Welds
or RIVTAC
Prepare for installation.
注
A red X indicates a location where a factory-installed fastener is not being replaced.

or High Strength Structural Rivets, 6.5 mm
Bolt, Panhead Flange
- A = 20 毫米
- B = 25 毫米
Apply structural adhesive to the mating surfaces on the vehicle and the new component or components.
Install the new component or components.
将这些螺栓拧紧至 25 Nm。
Perform any necessary post-repair operations.