2026-08-09

盖板 - 减震塔 - 左侧(拆卸和更换)

校正代码 12251012 0.06 NOTE: Unless otherwise explicitly stated in the procedure, the correction code and its associated FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. NOTE: See 人员保护 to make sure wearing proper PPE when performing the below procedure. NOTE: See for safe and healthy working practices.

扭矩规格

表 1. 扭矩规格: 盖板 - 减震塔 - 左侧(拆卸和更换)
描述 扭矩值 推荐工具 重复使用/更换 备注
将前备箱储物单元固定到清洗器储液罐颈部的螺栓
5 Nm (3.7 lbs-ft)
  • 10 毫米套筒扳手
重复使用

拆卸

  1. 打开 LH 前车门,然后完全降下 LH 前车窗。
  2. 拆下前备箱后部挡板。请参阅前备箱挡板 - 后部(拆卸和更换)。
  3. 拆下将前备箱储物单元固定到清洗液储液罐颈部的螺栓。
    5 Nm (3.7 lbs-ft)
    提示
    推荐使用以下工具
    • 10 毫米套筒扳手
  4. 松开将清洗液软管固定到清洗液罐颈部的锁片,然后从车上拆下清洗液罐颈部。
  5. 松开将线束固定到左侧减震塔盖的夹子。
  6. 松开将 LH 减震塔盖板固定到车辆的夹子,然后从车上拆下盖板。

    LH 减震塔盖如图所示,RH 类似

安装

安装程序与拆卸程序相反。