2024-07-17
门槛内件加长板
Repair Information
- Review all collision repair general practices and safety documentation and wear the appropriate PPE (Personal Protective Equipment) before beginning this procedure.
- Properly mount the vehicle on a frame bench when performing this procedure.
Parts List
| Quantity | Description | Image / Notes |
|---|---|---|
| 1 | MY EXTN, SILL INNER LWR SVC E-COATED（门槛内件加长板） |
|
| 1 |
 or  Structural Countersunk Rivets, 6.5 mm
|
|
| 1 |
Flow Form Rivet S38
|
When ordering parts, refer to the Parts Catalog and enter the VIN of the vehicle being repaired to find the correct parts (and the part numbers) for the vehicle. Alternatively, use the search function in the Parts Catalog to find a specific part for the vehicle.
Repair Procedure
-
拆下轮罩加长板（前部）。
-
拆下车门安装环内件的必要部分。
-
Remove the original component.
or 
Factory SPRs
-
Prepare for installation.
注A red X indicates a location where a factory-installed fastener is not being replaced. or Structural Countersunk Rivets, 6.5 mm
or Flow Form Rivets, S38
- A = 26 毫米
- B = 85 毫米
- Apply structural adhesive to the mating surfaces on the vehicle and the new component or components.
- Install the new component or components.
-
安装车门安装环内件的必要部分。
-
安装轮罩加长板（前部）。
- Perform any necessary post-repair operations.