侧翼支架（下部）保险杠固定支架
Repair Information
- 本程序仅用于维修侧翼支架（下部）保险杠固定支架。要维修侧翼支架（下部）组件，请参阅 侧翼支架（下部） 程序。
- Review all collision repair general practices and safety documentation and wear the appropriate PPE (Personal Protective Equipment) before beginning this procedure.
- This procedure can be completed without using a frame bench.
Parts List
| Quantity | Description | Image / Notes |
|---|---|---|
| 1 | LWR WING BRACKET（侧翼支架 - 下部） |
|
| 3 |
Structural Bulb Rivet, 6.5 mm
|
When ordering parts, refer to the Parts Catalog and enter the VIN of the vehicle being repaired to find the correct parts (and the part numbers) for the vehicle. Alternatively, use the search function in the Parts Catalog to find a specific part for the vehicle.
Repair Procedure
-
Remove the original component.
Reference
Line/Point
Cut Line
- A = 4 毫米
-
从侧翼支架（下部）维修零件上拆下保险杠固定支架。
Reference
Line/Point
Cut Line
- B = 161 毫米
-
Prepare for installation.
- Apply structural adhesive to the mating surfaces on the vehicle and the new component or components.
- Install the new component or components.
- Perform any necessary post-repair operations.
