后围内件
Repair Information
- Review all collision repair general practices and safety documentation and wear the appropriate PPE (Personal Protective Equipment) before beginning this procedure.
- This procedure can be completed without using a frame bench.
Parts List
| Quantity | Description | Image / Notes |
|---|---|---|
| 1 | MY Rear Quarter Inner SVC E-COATED（后围内件） |
|
| 8 | ||
| 1 |
注 仅当更换 RH 后围内件时才需要此紧固件。 |
|
| 1 |
When ordering parts, refer to the Parts Catalog and enter the VIN of the vehicle being repaired to find the correct parts (and the part numbers) for the vehicle. Alternatively, use the search function in the Parts Catalog to find a specific part for the vehicle.
Repair Procedure
-
拆卸后围外件。
-
Remove the original component.
or 
Factory SPRs
or 
Factory Spot Welds
-
Prepare for installation.
注A red X indicates a location where a factory-installed fastener is not being replaced.
or 
High Strength Structural Rivets, 6.5 mm
- A = 17 毫米
or 
Flow Form Rivets, S18
注仅当更换 RH 后围内件时才需要此紧固件。
- Apply structural adhesive to the mating surfaces on the vehicle and the new component or components.
- Install the new component or components.
-
安装后围外件。
- Perform any necessary post-repair operations.
