后纵梁端板（适用于 1 件式车底铸件）
Repair Information
- Review all collision repair general practices and safety documentation and wear the appropriate PPE (Personal Protective Equipment) before beginning this procedure.
- This procedure can be completed without using a frame bench.
Parts List
| Quantity | Description | Image / Notes |
|---|---|---|
| 1 | MY ASY-PLT-BUMPER MTG RR LH SVC E-COAT（后纵梁端板） |
|
| 4 |
When ordering parts, refer to the Parts Catalog and enter the VIN of the vehicle being repaired to find the correct parts (and the part numbers) for the vehicle. Alternatively, use the search function in the Parts Catalog to find a specific part for the vehicle.
Repair Procedure
-
拆卸后面板侧方总成（适用于 1 件式车底铸件）。
-
Remove the original component.
or 
Bolts
-
Prepare for installation.
or Bolts
- Apply structural adhesive to the mating surfaces on the vehicle and the new component or components.
-
Install the new component or components.
将螺栓拧紧至 50 Nm。
-
安装后面板侧方总成。
- Perform any necessary post-repair operations.