2026-11-06
绝缘体 - 轮罩 - 套件(拆卸和更换)
校正代码
15307402 1.1
NOTE: Unless otherwise explicitly
stated in the procedure, the correction code and its associated FRT reflect all of the
work required to perform this procedure, including the linked procedures. Do not stack correction codes unless
explicitly told to do so.
NOTE: See Flat Rate
Times to learn more about FRTs and how they are created.
NOTE: See 人员保护 to make sure wearing proper PPE when
performing the below procedure. NOTE: See for safe and healthy working
practices.
- 2026-10-20: 更新了拆卸绝缘体的步骤,更新后通过切开绝缘体以进行拆卸。
- 2023 年 10 月 9 日:更新了有关拆卸/安装后饰板总成的参阅内容。
- 2023 年 10 月 10 日:添加了“请勿手动关闭充电接口盖板”的注意事项。
设备:
- 1076927-00-A Hioki 测试仪
- 1054720-00-A 便携式工作台
- 1060071-00-A 1/4 英寸钻头六角扭矩扳手
- 1076928-00-A 测试探针 - Hioki 9461
拆卸
- 拆下右侧轮罩绝缘体。请参阅 Wheelhouse Insulator - Rear - RH (Remove and Replace)。
- 拆下左侧后轮罩绝缘体。请参阅 隔音垫 - 轮毂罩 - 左一套(拆卸和更换) ((拆卸和更换))。
安装
- 安装右侧轮罩绝缘体。请参阅 Wheelhouse Insulator - Rear - RH (Remove and Replace)。
- 安装左侧后轮罩绝缘体。请参阅 隔音垫 - 轮毂罩 - 左一套(拆卸和更换) ((拆卸和更换))。