2026-10-15

安全带锁扣 - 第二排 - LH（5 座）（拆卸和更换）

校正代码 20057002 0.18 NOTE: Unless otherwise explicitly stated in the procedure, the correction code and its associated FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. NOTE: See 人员保护 to make sure wearing proper PPE when performing the below procedure. NOTE: See for safe and healthy working practices.

警告
Supplemental Restraint System (SRS) components can be hazardous if not serviced and handled correctly. See
警告
In the event of an airbag or seatbelt pretensioner deployment, certain components must be replaced, and other components must be inspected for damage. Refer to the Collision Repair Manual for a specific list of items that must be inspected and replaced.
  • 2024 年 11 月 26 日：添加了“将锁扣安装到座椅总成上时，需确认线束未缠绕在螺栓上”的备注。

拆卸

  1. 拆下第二排座椅下部座垫。请参阅 座椅座垫 - 下部 - 第二排（拆卸和更换）。
  2. 使用夹子撬具松开将左侧第二排锁扣固定到座椅骨架的夹子。
  3. 断开左侧第二排锁扣电气连接器。
  4. 松开将左侧第二排锁扣固定到座椅骨架的螺帽固定螺栓。
    注
    推荐使用以下工具
    • 梅花 T50 套筒

安装

  1. 拧紧螺帽固定螺栓，将左侧第二排锁扣安装到座椅骨架。
    40 Nm (29.5 lbs-ft)
    注
    确保没有电线夹在螺栓和锁扣支架之间。线束不应缠绕在螺栓上。
    注
    推荐使用以下工具
    • 梅花 T50 套筒
  2. 连接左侧第二排锁扣电气连接器。
  3. 固定将左侧第二排锁扣固定到座椅骨架的夹子。
  4. 安装第二排座椅下部座垫。请参阅 座椅座垫 - 下部 - 第二排（拆卸和更换）。