2024-07-03
Wheelhouse Outer
Repair Information
- Review all collision repair general practices and safety documentation and wear the appropriate PPE (Personal Protective Equipment) before beginning this procedure.
- This procedure can be completed without using a frame bench.
Parts List
| Quantity | Description | Image / Notes |
|---|---|---|
| 1 | PANEL - REAR WHEEL ARCH (Wheelhouse Outer) |
|
| 17 |
Structural Bulb Rivet, 6.5 mm
|
|
| 1 |
Rivet, 4.8 mm
|
|
| 2 |
Flow Form Rivet S28
|
When ordering parts, refer to the Parts Catalog and enter the VIN of the vehicle being repaired to find the correct parts (and the part numbers) for the vehicle. Alternatively, use the search function in the Parts Catalog to find a specific part for the vehicle.
Repair Procedure
-
Remove the Rear Quarter Outer (Complete) (Vehicles Built Through February 14, 2022).
-
Remove the original component.
or 
Factory Spot Welds
-
Prepare for installation.
or Structural Bulb Rivets, 6.5 mm
- A = 11 mm.
- B = 17 mm.
- Apply structural adhesive to the mating surfaces on the vehicle and the new component or components.
- Install the new component or components.
-
Install the Rear Quarter Outer (Complete) (Vehicles Built Through February 14, 2022).
-
Install the fasteners as indicated.
- Perform any necessary post-repair operations.
