Sill Retainer Strip
Correction code:
Pending
NOTE:
Unless explicitly stated in the procedure, the above
correction code includes all Collision Repair and Service
repair work required to perform this procedure, including
the linked Collision Repair procedures and linked Service
procedures. Do not stack Collision Repair correction
codes unless explicitly told to do so. Depending
on the damage to the vehicle, additional repairs may be
required.
Repair Information
- Review all collision repair general practices and safety documentation and wear the appropriate PPE (Personal Protective Equipment) before beginning this procedure.
- This procedure can be completed without using a frame bench.
Parts List
| Quantity | Description | Image / Notes |
|---|---|---|
| 1 | ASY - SIDE SILL BATTERY NUT RETAINER MIDDLE FRONT (Sill Retainer Strip - Middle Front) | |
| 1 | ASY - SIDE SILL BATTERY NUT RETAINER MIDDLE REAR (Sill Retainer Strip - Middle Rear) | |
| 1 | ASY - SIDE SILL BATTERY NUT RETAINER REAR (Sill Retainer Strip - Rear) | |
| 1 | ASY - SIDE SILL BATTERY NUT RETAINER FRONT (Sill Retainer Strip - Front) | |
| 10 | Pop Rivets |
When ordering parts, refer to the Parts Catalog and enter the VIN of the vehicle being repaired to find the correct parts (and the part numbers) for the vehicle. Alternatively, use the search function in the Parts Catalog to find a specific part for the vehicle.
Repair Procedure
-
Remove the original component.
or Factory Structural Rivets
NoteIf necessary, remove undamaged Sill Retainer Strips to access the damaged Sill Retainer Strip. -
Prepare for installation.
or Pop Rivets
- Install the new component or components.
- Perform any necessary post-repair operations.