Recent Changes In This Manual

The list below shows procedures or pages that have been added or updated recently.

Procedure/Page Description Date
Vehicle and Wheel Paint Codes Garnet Red has been added to the Vehicle Paint Codes list. 09-June-2026
Battery Flow Nut (Rear) Replacement Procedure steps, images, and fasteners updated. 09-June-2026
Battery Flow Nut (Rear) Replacement New procedure added. 10-April-26
Approved Chemicals Added Structural Plastic Adhesive, and updated availability of Semi-Rigid Plastic Repair. 08-April-26
Approved Squeeze-Type Resistance Spot (STRS) Welders Update the list of approved GYS welders. 12-March-26
Approved Chemicals The list of Anti-Chip Coatings has been updated. 11-February-26
Falcon Door Striker Bracket Procedure steps and images, and fasteners updated. 02-April-25
Rear Quarter Outer (Complete) (Vehicles Built After February 14, 2022) Procedure steps and images updated. 28-March-25
Rear Quarter Outer Skin With C-Pillar Lower Extension (Vehicles Built After February 14, 2022) Procedure steps and images updated. 28-March-25
Rear Quarter Outer Skin With Lamp Housing (Vehicles Built After February 14, 2022) Procedure steps and images updated. 28-March-25
Rear Charger Mount Brace Procedure steps, images, and fasteners updated. 07-March-25
Rear Panel (Vehicles Built After May 21, 2024) Procedure steps, images, and fasteners updated. 04-March-25
Rear Panel (Vehicles Built Through May 21, 2024) Procedure steps, images, and fasteners updated. 27-February-25
Toeboard Assembly Procedure steps, images, and fasteners updated. 26-February-25
C-Pillar Upper Trim Attachment Bracket Procedure steps, images, and fasteners updated. 13-February-25
Rear Header Applique Bracket Procedure steps, images, and fasteners updated. 13-February-25
C-Pillar Reinforcement Procedure steps, images, and fasteners updated. 11-February-25
Approved Gas Metal Arc (GMA) Welders and Welding Wire List of approved welders updated to include the Cebora SynStar Twin 270T (Model 344). 11-February-25
Approved Squeeze-Type Resistance Spot (STRS) Welders List of approved welders updated to include Chief MI300T and TECNA 3680S welders. 04-February-25
Approved Gas Metal Arc (GMA) Welders and Welding Wire Updated the list of approved welders to include GYS P3 GYS Auto, Spanesi Q5.2 ONE INVERTER, and Chief MultiMig 822. 23 - January-25
Rear Quarter Outer (Lower) (Vehicles Built After February 14, 2022) Procedure steps, images, and fasteners updated. 09-January-25
Body Side (Complete) Procedure steps, images, and fasteners updated. 09-January-25