03/07/2024 16:08:36
A–Pillar Inner
Repair Information
- Review all collision repair general practices and safety documentation and wear the appropriate PPE (Personal Protective Equipment) before beginning this procedure.
- Properly mount the vehicle on a frame bench when performing this procedure.
Parts List
| Quantity | Description | Image / Notes |
|---|---|---|
| 1 | ASY-A PILLAR INR (A–Pillar Inner) |
|
| 1 |
Bolt
|
Tesla part number 1006529-00-A. |
When ordering parts, refer to the Parts Catalog and enter the VIN of the vehicle being repaired to find the correct parts (and the part numbers) for the vehicle. Alternatively, use the search function in the Parts Catalog to find a specific part for the vehicle.
Repair Procedure
-
Remove the necessary portion
of the Body Side Outer to expose the
underlying component being replaced.
-
Remove the A–Pillar Reinforcement.
-
Remove the Hinge Pillar Reinforcement.
-
Remove the Hinge Pillar Inner.
-
Remove the original component.
or 
Factory SPRs
or Bolts
-
Prepare for installation.
or Bolts
- Apply structural adhesive to the mating surfaces on the vehicle and the new component or components.
-
Install the new component or components.
Torque the bolt to 12 Nm.
-
Install the Hinge Pillar Inner.
-
Install the Hinge Pillar Reinforcement.
-
Install the A–Pillar Reinforcement.
-
Install the necessary
portion of the Body Side Outer that was removed to
expose the component being replaced.
- Perform any necessary post-repair operations.