Rear Rail End Plate
Correction code:
10101808102
10101808202
NOTE:
Unless explicitly stated in the procedure, the above
correction code includes all Collision Repair work required
to perform this procedure, including the linked Collision
Repair procedures. Do not stack Collision Repair
correction codes unless explicitly told to do
so. Add any associated mechanical procedures
needed to perform this procedure.
Repair Information
- Review all collision repair general practices and safety documentation and wear the appropriate PPE (Personal Protective Equipment) before beginning this procedure.
- This procedure can be completed without using a frame bench.
Parts List
| Quantity | Description | Image / Notes |
|---|---|---|
| 1 | BUMPER PLATE (Rear Rail End Plate) |
|
| 4 |
Bolt
, HF
M10x1.50x25 [10.9]-G720 |
Tesla part number 2007116. |
| 1 |
Bolt
, M8-1.25x16 |
Tesla part number 1005582-00-A. |
| 1 |
Nut
|
Tesla part number 2007088. |
When ordering parts, refer to the Parts Catalog and enter the VIN of the vehicle being repaired to find the correct parts (and the part numbers) for the vehicle. Alternatively, use the search function in the Parts Catalog to find a specific part for the vehicle.
Repair Procedure
-
Remove the Rear Panel (Vehicles Built Through May 21, 2024).
-
Remove the original component.
or 
Factory Structural Rivets
or Bolts
-
Prepare for installation.
- Apply structural adhesive to the mating surfaces on the vehicle and the new component or components.
-
Install the new component or components.
Torque the bolts as follows:
- Tesla part number 2007116: 48 Nm.
- Tesla part number 1005582-00-A: 25 Nm.
-
Install the Rear Panel (Vehicles Built Through May 21, 2024).
- Perform any necessary post-repair operations.