2025-08-06

A–Pillar Reinforcement

Correction code: 10100129602 10100129702 NOTE: Unless explicitly stated in the procedure, the above correction code includes all Collision Repair work required to perform this procedure, including the linked Collision Repair procedures. Do not stack Collision Repair correction codes unless explicitly told to do so. Add any associated mechanical procedures needed to perform this procedure.

Parts List

Quantity Description Image / Notes
1 ASY - REINF A PILLAR TAPE LH (A–Pillar Reinforcement)
3 Bolt , M6X18 PC88 MAT Tesla part number 1006529-00-A.
1 Bolt , M8X25+M8X15 Tesla part number 1060709-00-B.

When ordering parts, refer to the Parts Catalog and enter the VIN of the vehicle being repaired to find the correct parts (and the part numbers) for the vehicle. Alternatively, use the search function in the Parts Catalog to find a specific part for the vehicle.

Repair Procedure

  1. Remove the necessary portion of the Body Side Outer to expose the underlying component being replaced.
  2. Remove the original component.
    or Bolts
  3. Prepare for installation.
    or Bolts
  4. Install the new component or components.
    • Hex-head M6x18 bolts, part number 1006529-00-A: 12 Nm.
    • Double-ended stud, M8X25+M8X15, part number 1060709-00-B: 10 Nm.
  5. Install the necessary portion of the Body Side Outer that was removed to expose the component being replaced.
  6. Perform any necessary post-repair operations.