2026-08-09

装饰件 - 翼子板 - 后 - 左侧（拆卸和更换）

校正代码 12201402 0.06 NOTE: Unless otherwise explicitly stated in the procedure, the correction code and its associated FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. NOTE: See 人员保护 to make sure wearing proper PPE when performing the below procedure. NOTE: See for safe and healthy working practices.

警告
The video(s) included in this procedure are meant as an overview for supplemental purposes only. Follow all of the steps listed in the procedure to avoid damage to components and/or personal injury.
  • 2023 年 6 月 15 日：添加了完整程序概览视频，仅作为补充材料。

拆卸

  1. 松开将 LH 后翼子板饰板固定到车辆的夹子 (x12)，然后从车上拆下该饰板。
    提示
    从 LH 后翼子板饰板中心开始，小心地将该饰板拉离车辆并向外操作。
    警告
    注意不要弯曲将翼子板饰板后部固定到后饰板的锁片。

安装

安装程序与拆卸程序相反，以下各项除外：

  • 将后翼子板饰板对准锁片放到车门槛板和后部扩散器中，然后再安装夹子。
  • 安装完后翼子板饰板对准锁片后，在翼子板饰板每一端安装夹子，然后朝中央依次作业。
    警告
    注意不要弯曲将翼子板饰板后部固定到后饰板的锁片。