2026-08-09
盖板 - 门槛板 - 下 - 左侧(拆卸和更换)
校正代码
12202602 0.12
NOTE: Unless otherwise explicitly
stated in the procedure, the correction code and its associated FRT reflect all of the
work required to perform this procedure, including the linked procedures. Do not stack correction codes unless
explicitly told to do so.
NOTE: See Flat Rate
Times to learn more about FRTs and how they are created.
NOTE: See 人员保护 to make sure wearing proper PPE when
performing the below procedure. NOTE: See for safe and healthy working
practices.
拆卸
-
松开将 LH 下部门槛板罩固定到前后轮拱内衬的外侧夹子。
图 1. 前 图 2. 后 -
松开将 LH 下部门槛板罩固定到门槛板的夹子和锁片,然后从面板上拆下盖罩。
提示在车门面板与门槛饰板之间使用塑料饰板工具,以便辅助松开锁片。
安装
安装程序与拆卸程序相反。