2025-09-11

Cover - Charging Port - 3rd Row Seat - LH (Model YL) (Remove and Replace)

Correction code 13090101802 FRT 0.12 NOTE: Unless otherwise explicitly stated in the procedure, the correction code and FRT listed above reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. NOTE: See Personal Protection to make sure you are wearing proper PPE when performing the procedure below. NOTE: See Ergonomic Precautions for safe and healthy working practices.

Torque Specifications

Table 1. Torque Specifications: Cover - Charging Port - 3rd Row Seat - LH (Model YL) (Remove and Replace)
Description Torque Value Recommended Tools Reuse/Replace Notes
Screws (x2) that attach the 3rd row seat charge port cover to the seat cushion assembly
0.8 Nm (7 lbs-in)
  • Torx T20 socket
 Reuse
Screws (x2) that attach the 3rd row seat charge port cover to the rear USB hub
0.8 Nm (7 lbs-in)
  • Torx T20 socket
 Reuse

Remove

  1. Remove the 3rd row seat cushion. See Cushion - Seat - 3rd Row (Model YL) (Remove and Replace).
  2. Remove the screws (x2) that attach the 3rd row seat charge port cover to the seat cushion assembly.
    Informational PurposesAn informational icon, calling your attention
    TIp
    Use of the following tool(s) is recommended:
    • Torx T20 socket
  3. Lift the charge port cover upwards to release the locator pins (x2), and then slide the cover forward to release the tab that attaches the cover to the assembly.
  4. Remove the screws (x2) that attach the 3rd row seat charge port cover to the rear USB hub, and then remove the cover from the cushion assembly.
    Informational PurposesAn informational icon, calling your attention
    TIp
    Use of the following tool(s) is recommended:
    • Torx T20 socket

Install

  1. Install the screws (x2) that attach the 3rd row seat charge port cover to the rear USB hub.
    0.8 Nm (7 lbs-in)
    Informational PurposesAn informational icon, calling your attention
    TIp
    Use of the following tool(s) is recommended:
    • Torx T20 socket
  2. Install the tab that attaches the 3rd row seat charge port cover to the cushion assembly, and then press the cover downward to install the locator pins (x2).
  3. Install the screws (x2) that attach the 3rd row seat charge port cover to the seat cushion assembly.
    0.8 Nm (7 lbs-in)
    Informational PurposesAn informational icon, calling your attention
    TIp
    Use of the following tool(s) is recommended:
    • Torx T20 socket
  4. Install the 3rd row seat cushion. See Cushion - Seat - 3rd Row (Model YL) (Remove and Replace).