2025-09-12

Frame Mechanism - Headrest - Driver Seat (Model YL) (Remove and Replace)

Correction code 13010702702 FRT 0.24 NOTE: Unless otherwise explicitly stated in the procedure, the correction code and FRT listed above reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. NOTE: See Personal Protection to make sure you are wearing proper PPE when performing the procedure below. NOTE: See Ergonomic Precautions for safe and healthy working practices.

Remove

  1. Remove the driver seat back shell. See Shell - Seat Back - Driver Seat (Model YL) (Remove and Replace).
  2. Release the driver seat back cover retainers (x7) from the driver seat back frame.
  3. Adjust the driver seat back rearward.
    Informational PurposesAn informational icon, calling your attention
    Note
    This is to aid removal of the headrest frame mechanism.
  4. Pull the seat upholstery away from the seat back frame to remove the headrest frame mechanism assembly.
    Informational PurposesAn informational icon, calling your attention
    Note
    Do not use excessive force during removal.

Install

  1. Align the headrest frame pillar with the seat back pillar base, and then press down the headrest frame mechnanism, and then install the seat upholstery back to the seat back frame.
    Informational PurposesAn informational icon, calling your attention
    Note
    Do not fully install the headrest frame pillars to the pillar bases at this time. The pillars will be fully install during the installation of the driver seat back shell.
  2. Move the driver seat back back to its original position.
  3. Install the driver seat back cover retainers(x7) to the driver seat back frame.
  4. Install the driver seat back shell. See Shell - Seat Back - Driver Seat (Model YL) (Remove and Replace).