2025-09-11

Rear Track Cover - 2nd Row Seat - LH (Model YL) (Remove and Replace)

Correction code 13080201302 FRT 0.12 NOTE: Unless otherwise explicitly stated in the procedure, the correction code and FRT listed above reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. NOTE: See Personal Protection to make sure you are wearing proper PPE when performing the procedure below. NOTE: See Ergonomic Precautions for safe and healthy working practices.

Torque Specifications

Table 1. Torque Specifications: Front Track Cover - 2nd Row Seat - LH (Model YL) (Remove and Replace) / Rear Track Cover - 2nd Row Seat - LH (Model YL) (Remove and Replace)
Description Torque Value Recommended Tools Reuse/Replace Notes
Bolts (x2) that attach the rear of the LH 2nd row seat to the body
33.5 Nm (24.7 lbs-ft)
  • Torx Plus T45 socket
 Replace 1458818-00-A
Bolts (x2) that attach the front of the LH 2nd row seat to the body
33.5 Nm (24.7 lbs-ft)
  • Torx Plus T45 socket
 Replace 1458818-00-A

Remove

  1. Open the LH doors, then lower the LH windows.
  2. Move both the LH 1st row seat and the LH 2nd row seat backward.
    Informational PurposesAn informational icon, calling your attention
    Note
    Adjust the seat back if necessary to prevent contact with the headliner and other parts.
  3. Remove and discard the bolts (x2) that attach the front of the LH 2nd row seat to the body.
    Informational PurposesAn informational icon, calling your attention
    TIp
    Use of the following tool(s) is recommended:
    • Torx Plus T45 socket
  4. Move the LH 2nd row seat forward.
    Informational PurposesAn informational icon, calling your attention
    Note
    Adjust the seat back if necessary to prevent contact with the headliner.
  5. Remove and discard the bolts (x2) that attach the rear of the LH 2nd row seat to the body.
    Informational PurposesAn informational icon, calling your attention
    TIp
    Use of the following tool(s) is recommended:
    • Torx Plus T45 socket
  6. Lift the seat upward, then remove the rear track covers from the LH 2nd row seat assembly by lifting the clips (x2) on both sides and disengaging them in the direction of the arrow.

Install

  1. Lift the seat upward, then install the rear track covers to the LH 2nd row seat assembly by securing the clips (x2) on both sides, ensuring the clips are properly engaged in place.
  2. Install new bolts (x2) that attach the rear of the LH 2nd row seat to the body.
    33.5 Nm (24.7 lbs-ft)
    Informational PurposesAn informational icon, calling your attention
    TIp
    Use of the following tool(s) is recommended:
    • Torx Plus T45 socket
  3. Move the LH 2nd row seat backward.
    Informational PurposesAn informational icon, calling your attention
    Note
    Adjust the seat back if necessary to prevent contact with the headliner.
  4. Install new bolts (x2) that attach the front of the LH 2nd row seat to the body.
    33.5 Nm (24.7 lbs-ft)
    Informational PurposesAn informational icon, calling your attention
    TIp
    Use of the following tool(s) is recommended:
    • Torx Plus T45 socket
  5. Move both the LH 2nd row seat and the LH 1st row seat to their original positions.
  6. Raise the LH windows, and close the LH doors.