2025-09-11
Insulator - Wheelhouse - Front - RH (Model YL) (Remove and Replace)
Correction code
15301000602
FRT
0.66
NOTE: Unless otherwise explicitly stated in the procedure, the correction code and FRT listed above reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so.
NOTE: See Flat Rate Times to learn more about FRTs and how they are created.
NOTE: See Personal Protection to make sure you
are wearing proper PPE when performing the procedure below.
NOTE: See Ergonomic Precautions for safe and healthy working practices.
Remove
- Remove the RH rear trunk side trim. See Trunk Side Trim - LH (Model Y L) (Remove and Replace).
-
Release the clips (x3) that attach the
RH body harness to the body, and move it aside.
-
Remove the RH front wheelhouse
insulator from the vehicle.
Install
-
Install the RH front wheelhouse
insulator to the vehicle.
-
Install the clips (x3) that attach the
RH body harness to the body.
- Install the RH rear trunk side trim. See Trunk Side Trim - LH (Model Y L) (Remove and Replace).