2025-11-27

Rear Headliner (Model YL) (Remove and Replace)

Correction code 15200200002 FRT 0.06 NOTE: Unless otherwise explicitly stated in the procedure, the correction code and FRT listed above reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. NOTE: See Personal Protection to make sure you are wearing proper PPE when performing the procedure below. NOTE: See Ergonomic Precautions for safe and healthy working practices.

  • 2025-11-27: Updated to specify clips (x3) and consumable tether clips (x2).

Remove

  1. Open the LH rear door and lower the LH rear window.
  2. Release the clips (x3), tether clips (x2) and location pin that attach the rear headliner to the body, and then remove the rear headliner from the vehicle.
    Informational PurposesAn informational icon, calling your attention
    Note
    • Pull the rear headliner horizontally towards the front of the vehicle to release the clips.
    • Discard the tether clips after removal.

Install

  1. Align the location pin, install new tether clips (x2), and secure the clips (x3) that attach the rear headliner to the body.
    Informational PurposesAn informational icon, calling your attention
    Note
    Install the rear headliner horizontally towards the rear of the vehicle to engage the clips.
  2. Raise the LH rear window and close the LH rear door.