2025-09-11

Thigh Extension - 1st Row - LH (Model YL) (Remove and Replace)

Correction code 13010100102 FRT 0.18 NOTE: Unless otherwise explicitly stated in the procedure, the correction code and FRT listed above reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. NOTE: See Personal Protection to make sure you are wearing proper PPE when performing the procedure below. NOTE: See Ergonomic Precautions for safe and healthy working practices.

Torque Specifications

Table 1. Torque Specifications: Thigh Extension - 1st Row - LH (Model YL) (Remove and Replace)
Description Torque Value Recommended Tools Reuse/Replace Notes
Screws (x2) that attaches the driver seat thigh extension switch to the driver seat outboard side shield assembly
0.7 Nm (6 lbs-in)
  • Torx T20 socket
 Reuse

Remove

  1. Remove the driver seat outboard side shield assembly. See Side Shield Assembly - Outboard - Driver Seat (6 Seat) (Remove and Install).
  2. Remove the driver seat thigh extension switch button. See Button - Thigh Extension - 1st Row - LH (Model YL) (Remove and Replace).
  3. Remove the screws (x2) that attach the driver seat thigh extension switch to the driver seat outboard side shield assembly, and then release the tab to remove the thigh extension switch.
    Informational PurposesAn informational icon, calling your attention
    TIp
    Use of the following tool(s) is recommended:
    • Torx T20 socket

Install

  1. Install the tab that attaches the driver seat thigh extension switch to the driver seat outboard side shield assembly, and then install the screws (x2) that attach the thigh extension switch to the outboard side shield assembly.
    0.7 Nm (6 lbs-in)
    Informational PurposesAn informational icon, calling your attention
    TIp
    Use of the following tool(s) is recommended:
    • Torx T20 socket
  2. Install the driver seat thigh extension switch button. See Button - Thigh Extension - 1st Row - LH (Model YL) (Remove and Replace).
  3. Install the driver seat outboard side shield assembly. See Side Shield Assembly - Outboard - Driver Seat (6 Seat) (Remove and Install).