2023-03-21

Cover – Tow Hitch (Remove and Replace)

Correction code 12036002 0.06 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so.NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com. NOTE: See Personal Protection to make sure wearing proper PPE when performing the below procedure.

  • 2023-03-20: Updated "trailer" to "tow", and differentiated correction codes.

Remove

  1. Use a plastic trim tool to release the push clips (x2) that attach the tow hitch cover to the diffuser.
    Informational PurposesAn informational icon, calling your attention
    Note
    On some vehicles the clips may be slotted instead of being push clips. On these vehicles, use a flathead screwdriver to turn the clip until it is in an unlocked position.
  2. Remove the tow hitch cover.

Install

  1. Maneuver the tow hitch cover in place, and then install the clips (x2) that attach it to the diffuser.
    Informational PurposesAn informational icon, calling your attention
    Note
    On some vehicles the clips may be slotted instead of being push clips. On these vehicles, use a flathead screwdriver to turn the clip until it is in a locked position.