Diffuser - Rear Fascia (Remove and Replace)
Correction code
12030802
0.42
NOTE: Unless otherwise explicitly
stated in the procedure, the correction code and its associated FRT reflect all of the
work required to perform this procedure, including the linked procedures. Do not stack correction codes unless
explicitly told to do so.
NOTE: See Flat Rate
Times to learn more about FRTs and how they are created.
NOTE: See Personal Protection to make sure wearing proper PPE when
performing the below procedure. NOTE: See for safe and healthy working
practices.
Torque Specifications
| Description | Torque Value | Recommended Tools | Reuse/Replace | Notes |
|---|---|---|---|---|
| Bolts that attach the rear fascia diffuser to the vehicle |
 4 Nm (2.9 lbs-ft) |
|
Reuse |
Remove
- Raise and support the vehicle. See #GUID-A0CF7C9C-B57C-42B3-B8ED-A95758D026E9.
- Remove the mid aero shield panel. See Panel - Aero Shield - Rear (Remove and Replace).
-
Remove the bolts that attach the rear fascia diffuser to the vehicle.4 Nm (2.9 lbs-ft)TipUse of the following tool(s) is recommended:
- 10 mm socket
-
Remove the clips that attach the rear fascia diffuser to the body, and then remove the diffuser.
Install
Installation procedure is the reverse of removal.